SETTING UP YOUR DEVICE
ECO Manual
76
When you want to use one of your settings, open the SETTINGS MENU and select the Use
Settings key that you want.
Store the "Use Settings" Keys on your Overlay
You can copy your Use Settings keys and store them under icon sequences on your
communication overlay. When you do this, you do not have to go to the Toolbox each time you
want to change to different settings. You can also assign your settings to a specific key using
ASSIGN KEY.
. Use the procedure that is described abpve. The example below describes storing a Use
Settings key under an icon sequence.
Store the Use #1, 2 or 3 Settings Key Under an Icon Sequence:
1. First, save the settings you want to use, then:
2. Go to the Toolbox.
3. Activate STORE CORE.
4. Activate the icon sequence you want to use.
5. Type in any text you want to use to describe the settings: for example, "afternoon settings."
This text will be visible on the display when you activate your sequence.
6. Activate INSERT TOOL on your spelling keyboard.
7. Find the USE SETTINGS #1, 2 or 3 keys in the All Tools List and activate the one you want
to store.
8. Activate OK.
9. You see the storing screen. Activate OK.
10. Go to your communication overlay. Activate the icon sequence you stored the settings
under. You should see: "Are you sure you want to replace your current settings with Settings
#X?" If you want to use the new settings, activate YES. If you don't, activate NO.
Programmer Tip: You can plug a USB mouse and/or keyboard into the USB ports on the
side of the device case and use it to store. When the keyboard is plugged in, you can use it for
storing. You must be in STORE CORE or EDIT CORE for the text to appear in your device's
Text Display Area. When the mouse is plugged in, move the cursor to the key you want. Click
the mouse to activate the key.
To Next Page
Loading...