SETTING UP YOUR DEVICE
ECO Manual
50
1 Switch Scanning Options
Magnify Windows Clicks
Magnification Factor
Magnification Area
Magnification works when your ECO is in a Windows application.
When Magnify Window Clicks is ON you can select an area in your Windows application and
it will appear in a magnified box. This makes it easier for you to select the options you want in
your application.
Magnification Factor: how large do you want the area magnified—2 times larger (2X) 4 times
larger (4X)?
The Magnification Area (in number of pixels) is the size of the area you are magnifying.
We recommend that you select different numbers for Factor and Area and try them out in an
application on your ECO. You'll then have a good idea of what works for you.
For more information see The Magnification Option beginning on page 262.
Scanning Speed
This is the amount of time it takes for your device to move from one key, row, or column to the
next in a scan. The default scanning speed is one second. This means it takes one second from
the time one key is highlighted until the next key is highlighted.
Acceptance Time
The amount of time you must maintain contact with your switch before the key you have
scanned to is accepted. The device beeps when your key is accepted. For example, if you set
acceptance time for .50 seconds, you must activate and hold your switch for ½ second before the
key will be selected and the device beeps.
Note: if you are using a 1 switch scanning selection that includes hold, the acceptance time
will begin when you release your switch.
Release Time
This tells your device how long to wait after you release your switch before you can make
another activation with the same key or switch. For example, if you set the Release Time for 1
second, you must wait one second after you release your switch before you can continue to scan
or activate your switch. If you release your switch and then accidentally activate it again before
the release time has passed, your device will not make any activations.
Auto Repeat
This lets you choose how fast a key will repeat when you hold it down.
To Next Page
Loading...