SETTING UP YOUR DEVICE
ECO Manual
49
Row/Column
The scan highlights each row of keys beginning with the top row and moving down the screen.
When the row that contains the key you want is highlighted, activate your switch. The scan will
highlight the separate columns in the row you selected, moving from left to right across the
screen. When the key you want is highlighted, activate your switch. The device beeps when your
key is accepted.
Column/Row
The scan highlights the columns first instead of the rows, moving from left to right across the
screen. When the scan reaches the column that contains the key you want, activate your switch.
The scan begins to highlight each key in that row. When the key you want is highlighted,
activate your switch. The device beeps when your key is accepted.
Quarter Row/Column
Quarter Column/Row:
The scan divides the overlay into quarters. When the scan reaches the quarter you want, activate
your switch. The rows or columns in that quarter are scanned. Select the row or column you
want. Individual keys are then scanned. Select the key you want. You can select Auto, Hold or
Step to scan.
Predictive Selection
This works hand-in-hand with Icon Prediction. (Icon Prediction is in the FEEDBACK MENU
and the default is ON.)
When you turn Predictive Selection On, your device highlights only those icons where
messages are stored. These highlighted icons are the only keys on the keyboard that will
produce a response.
You can change the color of the non-active keys to grey or white. Go to the FEEDBACK
MENU, Icon Prediction and select Grey or White. Grey allows you to see the shadow of the
icon on the key; white turns the entire key white so it looks blank. But if you try to select a grey
or white key, nothing will happen.
Note: Icon Prediction alone allows you to press grey or white keys. The key's icon will
appear in the Icon display area but no message will be spoken. Icon Prediction will work
whether Predictive Selection is On or not.
To Next Page
Loading...