Eco 14 - Page 243

INTERNAL COMPUTER
Eco Manual
243
2. Activate Add a Device.
3. Spell the device name (e.g., TV BDRM) and activate
OK.
 You can use up to 15 characters for a device or function name.
Spell the name of the first function you are going to teach to your device (e.g., POWER), then
activate
OK.
4. Teach the signal to your device.
5 Continue to add functions and teach signals or exit the
IR SET UP MENU.
Once you have added the new device and its functions and taught your communication aid the
new signals for the functions, you must decide how you want to store these signals so that you
can use them. Do you want to create a TV BDRM page like your other remote control pages?
Do you want it to be part of your REMOTES activity? Or do you want to store the functions
under different icon sequences on your communication overlay?
For an example let's say you want to store the TV BDRM functions on a
TV BDRM page and
that you want the page to be part of your REMOTES activity. You also want to be able to go to
any other remote page from your TV BDRM page.
An easy way to accomplish this is to use the
CREATE PAGE key in the Toolbox and copy one
of the existing TV remote pages to work from.