INTERNAL COMPUTER
Eco Manual
248
2. Use the arrow keys to select the device you want to add a function to (e.g., TV BDRM).
3. Select
Modify a Device.
4. Select
Add a Function.
5. Type in the name of the function you want to add (e.g., MUTE). Activate
OK.
7. Hold the remote control 6-8" away from your device's IR window and press the remote
control function you are adding.
8. Test the signal.
9. Continue to add functions or activate
OK to exit the menu.
Once the function is added to the
IR SETUP MENU, you must add it to the device page. (In
some cases the function may already be on the device page.)
1. Activate the MODIFY PAGE key in the Toolbox
2. Choose the device page you want to modify (e.g., TV BDRM)
3. Select the key where you want to put the function.
4. Choose
Spell Text for Message.
5a. If you copied your page, delete the original function, select
INSERT TOOL, then select the
IR key. Select TV BDRM, select MUTE and then select OK.
5b. If you created your TV BDRM page from scratch, select
INSERT TOOL, then select the IR
key. Select
TV BDRM, select MUTE and then select OK.
6. Pick an icon for your key and change the label if you want.
If you have been storing functions under icon sequences, you must also store any new
functions you have added. Follow the
STORE CORE procedure.
To Next Page
Loading...