INTERNAL COMPUTER
Eco Manual
274
5. Set Output Method to Bluetooth.
6. Press the
Pair with BT Adapter option.
7. You will see a yellow box telling you to
press the Pair button on the adapter. Press the
white circle
label on the Bluetooth adapter.
9. The LED on the adapter will begin to blink. When you see a solid blue light, the adapter
has paired with your ECO and computer. This can take up to 20-30 seconds.
10. Exit the
OUTPUT MENU and go to your spelling overlay.
11. Open a word document or an application you can type into.
12. Begin typing on your spelling overlay. Your information should appear on your
computer screen.
It does not matter in what order you perform steps 6 and 7. You can press the white circle
first, then press the
Pair option in the OUTPUT MENU or vice-versa.
Once your adapter is paired with your computer, it should always be paired. You can remove
it from your computer and the next time you plug it in, the LED should turn red and it should
be ready to go as long as your
OUTPUT MENU is set correctly.
The Bluetooth adapter has a wide range. Your ECO and the adapter do not have to "see" each
other to work.
To Next Page
Loading...