Eco 14 - Page 72

SETTING UP YOUR DEVICE
ECO Manual
72
2. Select the key on your overlay that contains the prompt you want to erase.
3. Select Store Category Prompt from the options that you see.
4. Activate CLEAR DISPLAY instead of spelling a prompt.
5. Activate OK.
To Erase a Label Prompt:
1. In the Toolbox, activate ASSIGN CORE KEYS.
2. Select the key on your overlay that contains the label you want to erase.
3. Activate the Rename Icon key
4. Activate CLEAR DISPLAY from your spelling overlay to erase the name of the label. The
current name disappears from the text display area. If you do not want to add a different
label to the icon, activate OK.
4a.If you want a new label, type it in and then activate OK.
To Erase a Content Prompt
1. In the Toolbox, activate ERASE CORE.
2. Activate the icon sequence whose contents you want to erase.
3. Activate YES (or NO if you change your mind).
 Important! When you delete a Content Prompt, you are deleting the message that was
stored under that icon sequence.
Open the menu.
Select Auditory Prompts.
Select the options you want to use.