SETTING UP YOUR DEVICE
ECO Manual
74
Output Destination
Select INTERNAL if you are using the ECO's internal computer.
Select EXTERNAL if you are want to connect to an external computer for computer emulation.
Host Computer Type
If you are sending information to an external computer, select the kind of computer that will
receive the information, MAC or IBM.
If you are using the internal computer, this option doesn't matter.
Output Mode
IMMEDIATE sends information from your communication aid to the computer or printer as
soon as you enter it.
DELAYED means you must select CLEAR DISPLAY to send text from your device to a
computer.
Auto Line Feed
If your printer does not automatically add lines at carriage returns when it prints, turn this option
ON. This tells the printer to start a new line when it sees a carriage return.
Character Pacing
When this is ON, the rate at which individual characters are sent from your device to a computer
is slowed down. You may need to turn this on if you are sending large groups of text at one time
(e.g., complete sentences).
Keyboard Layout
Select the appropriate keyboard layout for the country you are in.
Calibrate Mouse
If your mouse is not going where you want it to go on the screen, this option allows you to
calibrate it to fit your screen. Follow the directions on the screen.
You can always check to see whether output is On or Off by looking at the Status Display Area
on your device. There is an Output light: When you see the lit LED, Output is ON, otherwise it
is OFF.
OUTPUT OFF
OUTPUT ON
To Next Page
Loading...