Procedure
1.
Use the appropriate cable to connect your analyzer to a computer where AMS
Machinery Manager is installed, if you are using a wired connection.
2. On the computer, open Data Transfer.
3. On the analyzer, display the plot for the transient data.
You can press F7 Display Data on the Transient main menu, or collect data and view
the plot.
4. Press F7 Print Plot.
The plot appears in AMS Machinery Manager. You can save the plot as an image file
and send it to a local printer or save it to your computer.
8.9.3 Print a Transient plot to a memory card
You can save a plot to a memory card if you inserted a card into the analyzer. See
Section 2.15.1 for more information on inserting a memory card.
Prerequisites
On the analyzer, press Home > ALT > F2 General Setup > F6 Set Print Mode and ensure the
default print mode is set to Store as BMP on CARD or Store as JPG on CARD.
Procedure
1. Display your plot in Adv. Transient.
You can press F7 Display Data on the Transient main menu, or collect data and view
the plot.
2. Press F7 Print Plot.
3. Enter up to 8 characters for a file name.
4. Press Enter.
The analyzer begins creating and saving the file to the memory card. The progress is
displayed on the screen.
Advanced Transient
274 MHM-97432 Rev 7
To Next Page
Loading...
Need help?
General
