Option Description
F11 Intentionally blank.
F12 Intentionally blank.
2.10.1 Return to the Home screen
Press the Home key on the front of the analyzer.
2.11 Backlight
2.11.1 Set the LCD backlight
By default, the analyzer uses the Auto backlight mode to automatically adjust the backlight
intensity based on the light in your environment. You can disable the automatic
adjustments. You can set a timer to disable the backlight after a period of inactivity. See
Section 2.14.3.
Note
A higher backlight intensity decreases the battery pack life. For optimum battery pack life, set the
backlight to the medium setting.
Change the backlight using the LCD backlight key or the General Setup menu on the Home
screen.
Procedure
1.
To set the backlight using the LCD backlight key
, press the key to select a
setting.
Each time you press the key, the backlight changes. The default is Auto.
2.
To set the backlight from the Home screen:
a. Press Home > ALT > F2 General Setup > F8 Set Backlight.
b. Use the up and down arrow keys to select a setting.
c. Press Enter.
2.11.2 Set the keypad backlight
If your area has low light, turn on the keypad backlight to illuminate the analyzer's keys.
Introduction to the analyzer
22 MHM-97432 Rev 7
To Next Page
Loading...
Need help?
General
