10.11.3 Remove a note from a Balance job
1. From the Balance main menu, press ALT > F3 Notes.
2.
Under Assigned Notes, use the up and down arrow buttons to select a note to
delete.
3. Press F5 Remove From Job.
The note is removed from the Assigned Notes section and your job.
4. To remove all notes, press F6 Clear All Notes.
5. Press Enter.
10.11.4 Delete a note from the analyzer
You can only delete notes you created. Predefined notes cannot be deleted.
If you delete a note that you added to a job, the note is not removed from the analyzer.
Procedure
1. From the Balance main menu, press ALT > F3 Notes > F2 User Defined Notes.
2. Use the up and down arrow keys to select the note to delete.
3. Press F7 Delete User Note.
4. Press Enter.
10.12 Balance summary reports
The analyzer lets you print summary reports of your balance data. Connect to AMS
Machinery Manager to transfer and print the report.
Balance
340 MHM-97432 Rev 7
To Next Page
Loading...
Need help?
General
