3 Transfer files with CSI 2140
Topics covered in this chapter:
• AMS Machinery Manager Data Transfer
• AMS Machinery Manager Standalone Data Transfer application
• Communication setup
• Routes and jobs
• Analyzer firmware and programs
• Screen captures
• Splash screens
• Printing
3.1 AMS Machinery Manager Data Transfer
AMS Machinery Manager Data Transfer lets you manage the files in your analyzer. You
need Data Transfer to establish a connection between the AMS Machinery Manager
database and the programs in your analyzer so you can transfer vibration data (routes) and
job files. Data Transfer allows different levels of interactive functionality with your analyzer
depending on the analyzer's capabilities.
You can do the following:
• Transfer and store routes and jobs between the analyzer and AMS Machinery
Manager.
• Transfer and store routes and jobs between the analyzer and a folder on your
computer.
• Create route definition files and route data files that you can email to others.
• Take a screen capture of any screen in the analyzer.
• Print reports to AMS Machinery Manager.
• Upgrade the firmware or programs in your analyzer.
3.2 AMS Machinery Manager Standalone Data
Transfer application
If your computer does not have AMS Machinery Manager installed, use the AMS
Standalone Data Transfer application to transfer route and job files between an analyzer
and a folder on the computer or network. AMS Standalone Data Transfer does not have a
database, so all files are transferred to a computer folder. You can also print route reports
or plots from the analyzer and transfer firmware or programs to the analyzer.
Transfer files with CSI 2140
MHM-97432 Rev 7 45
To Next Page
Loading...
Need help?
General
