2. If more than one device is listed, use the up and down arrow keys to select a
Bluetooth device at the bottom of the screen.
3.
Press F3 Rename Device and enter up to 16 characters to change the name of the
device.
4. Press Enter.
2.16.6 View information about a Bluetooth device
You can view the information and settings for a Bluetooth device. This can help identify a
Bluetooth device.
Procedure
1. Press Home > F5 Comm Setup > F7 Bluetooth Setup.
2. Use the up and down arrow keys to select a device.
3. Press F8 Device Info.
2.16.7 Unpair a Bluetooth device
If you previously paired a device, you can use the unpair option to remove the device
information from the analyzer.
Procedure
1. Press Home > F5 Comm Setup > F7 Bluetooth Setup.
2. Use the up and down arrow keys to select a paired device.
3. Press F7 Unpair.
2.17 Utilities
2.17.1 File Utility
The File Utility on the Home screen lets you copy, delete, or move routes or jobs saved in the
internal memory or memory card. By default, the File Utility shows the files saved in the
internal memory. The Set Source Card and Mode keys are available only if you inserted a
memory card into the analyzer.
View all jobs saved in internal memory or a memory card from the File Utility. Use the up and
down arrow keys to scroll through the list of file names.
View all files saved in the analyzer
1. Press Home > F2 File Utility.
2. Use the up and down arrow keys to scroll through the files.
3. To view the files on the memory card, press F10 Set Source Card.
Introduction to the analyzer
36 MHM-97432 Rev 7
To Next Page
Loading...
Need help?
General
