Option Description
F10 Show RPM
F10 Hide RPM
View or hide the last RPM the tachometer read and the time between each
reading. A last time value of 0 indicates the tachometer is continuously
reading the RPM.
F12 Set Defaults Restore the default values for all tachometer setup options on the screen.
3. Press F6 Save / Recall Setup to save the setup, or press Enter to use the setup without
saving it.
9.4.2 Save a tachometer setup in ODS/Modal
The saved setup is accessible from all other programs on the analyzer.
Procedure
1.
From the ODS/Modal main menu, press ALT > F4 Tach Setup.
The Tachometer Setup screen appears. You can also open the Tach Setup option by
pressing F8 Job Manager > F4 Edit This Job > F8 Analysis Setup > F7 Tach Setup.
2. From the Tachometer Setup screen, press F6 Save / Recall Setup.
3. Use the up and down arrow keys to select Empty or another tachometer setup.
4. Press F2 Store Setup.
5. Enter up to 27 characters for the name.
6. Press Enter.
9.4.3 Open a saved tachometer setup in ODS/Modal
You can open and reuse a setup in any program on the analyzer.
Procedure
1. From the ODS/Modal main menu, press ALT > F4 Tach Setup.
The Tachometer Setup screen appears. You can also open the Tach Setup option by
pressing F8 Job Manager > F4 Edit This Job > F8 Analysis Setup > F7 Tach Setup.
2. From the Tachometer Setup screen, press F6 Save / Recall Setup.
3. Use the up and down arrow keys to select a setup.
4. Press F3 Recall Setup.
The setup appears on the Tachometer Setup screen.
5. Press Enter.
9.4.4 Rename a saved tachometer setup in ODS/Modal
1. From the ODS/Modal main menu, press ALT > F4 Tach Setup.
ODS/Modal
MHM-97432 Rev 7 285
To Next Page
Loading...
Need help?
General
