148 Universal Control Commands
The 4100 printer emulates several printers, each of which has defined
"standard" character sets, control code maps, and national-use character
maps. Examples are Epson-German-ESC 6 and IBM #2-Code Page 437.
Selecting these standard options can be done using the configuration
menu or control commands described in other sections. Selecting these
options modifies the data byte map as illustrated below.
Modifying the Data Byte Map, Standard Character Options
ABO-N1
The data byte map is also updated each time you perform one or all of
these actions:
1. Map various printable characters from the character library to a
range of data byte values.
2. Download some characters you design to RAM (temporary
memory) and select some of the download characters to print
by changing the character source to RAM.
3. Select a new emulation mode, overwriting any mapped
characters and control codes but not the download characters.
To Next Page
Loading...
Need help?
General