212 Epson FX-100 Control Commands
Example
REM SET ENLARGED PITCH
LPRINT CHR$(27);"W";CHR$(1);"This is large."
REM CANCEL ENLARGED PITCH
LPRINT CHR$(27);"W";CHR$(0);"This is small."
ESC x Set/Cancel NLQ
ASCII:
ESC x (n)
Control:
CTRL
[x (n)
Decimal:
27 120 (n)
Hexadecimal:
1B 78 (n)
Sets and cancels near letter quality (NLQ) print. n specifies whether NLQ
printing is set or cancelled as follows:
•
n = 1 or 49: Set NLQ
•
n = 0 or 48: Cancel NLQ
The character following ESC is the lowercase letter "x".
Note
: Near letter quality printing is available only in 10, 12, and 15 pitch.
Example
REM SELECT NLQ PRINT
LPRINT CHR$(27);"x";CHR$(1);
LPRINT "This is NLQ print."
REM CANCEL NLQ, SELECT DRAFT PRINT
LPRINT CHR$(27);"x";CHR$(0);
LPRINT "This is draft print."
To Next Page
Loading...
