Epson PowerLite 4100 - Page 267

Operator’s Guide 247
DC4 Cancel Enlarged Pitch
ASCII: DC4
Control:
CTRL
T
Decimal: 20
Hexadecimal: 14
Cancels enlarged pitch set with command SO or ESC SO. See the table
below.
Pitch Set with SO or
ESC SO
After DC4
9.1 18.2
8.57 17.14
8.33 16.67
7.5 15.0
6.0 12.0
5.0 10.0
This command does not cancel enlarged pitches set with ESC W (n), ESC
! (n), SOH A z ! (n), or ESC A z ! (n).
Example
REM SET 12 PITCH,
REM THEN CHANGE TO 10 PITCH.
REM AFTER THAT ENLARGE TO 5 PITCH.
REM FINALLY, CANCEL ENLARGED PITCH
REM TO RETURN TO 10 PITCH, AS FOLLOWS
LPRINT CHR$(27);CHR$(58);
LPRINT "Now printing in 12 cpi."
LPRINT CHR$(18);
LPRINT "Now printing in 10 cpi."
LPRINT CHR$(14);
LPRINT "Now printing in 5 cpi."
LPRINT CHR$(20);
LPRINT "Now printing in 10 cpi again."
LPRINT CHR$(13);