270 DEC LA210 Control Commands
Techniques for mapping preselected character maps into lower or upper
data bytes are shown in the following illustration. Default mappings are
shown below:
•
Lower Data Bytes: G0
•
Upper Data Bytes: G2
All available character maps are primary character maps and the printer
supports the DEC LA210 control commands used to select primary
character maps. No alternate character maps are available and control
codes to select alternate character maps are not supported.
The illustration that follows shows how character maps G0 through G3 are
selected as national-use, multilingual, or VT100 line draw maps, and then
how those maps are selected for the lower and upper data bytes of the
character set.
DEC LA210 Emulation Character Mapping
AB0-AJ
To Next Page
Loading...
