Epson Stylus Pro 4450 - Page 271

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 271
7. Remove the two screws securing the "Motor Assy., CR" and remove the
"Motor Assy., CR". (Refer to Figure 4-85.)
 C.C. 3x6: 2 pcs.
Figure 4-85. Motor Assy., CR Removal
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 5 “Adjustment” (p.366) and
perform specified adjustments after installing or replacing
the "Motor Assy., CR".
C.C. 3x6
Belt, CR