Epson Stylus Pro 4450 - Page 308

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 308
8. Peel acetate tape and release the four "Tube, Supply, Ink" from the notch
of the frame. (Refer to Figure 4-141.)
Figure 4-141. Releasing the Tube, Supply, Ink
C A U T I O N
When performing the following step, be careful not to bend
the "Tube, Supply, Ink" or scratch it with the edge of the
frame.
 Secure “Tube, Supply, Ink” to the frame with acetate
tape.
 The "Tube, Supply, Ink" should be slackened to the
direction (center of the printer) as shown in Figure 4-141.
Tube, Supply, Ink
Notch
Slack Direction
Acetate Tape