CONFIDENTIAL
Paper roll Character commands ESC r
Ver. 10.01 p. 133
ESC r
SETTING COMMAND
[Name] Select print color
[Format] ASCII ESC r
n
Hex 1B 72
n
Decimal 27 114
n
[Range] TM-U210:
n
= 0, 1, 48, 49
TM-U300A/B:
n
= 0, 1
[Default]
n
= 0
[Printers not featuring this command] TM-J2000, TM-T90, TM-T88III, TM-L90, TM-L60II, TM-P60
[Description] Selects a print color, using
n
as follows:
[Notes]
■ When standard mode is selected, this command is enabled only when processed at the beginning of the
line.
■ When page mode is selected, the color setting is the same for all data collectively printed by FF or
ESC FF.
■ This command is effective until ESC @ is executed, the printer is reset, or the power is turned off.
■ GS(N and GS ( L are available to define two-color printing. It is recommended that the commands
shown below be used with the models that feature these commands.
n
Print color
0, 48 Black
1, 49 Red
Printing data Command <Function>
Character GS ( N <Function48>
Background GS ( N <Function49>
Character commands
To Next Page
Loading...
