Epson TM-T88III

CONFIDENTIAL
Paper roll Bit-image commands ESC *
Ver. 10.01 p. 205
TM-U230
The modes selectable by m are as follows:
“Vertical” is in the direction of paper feeding and “horizontal” is perpendicular (at right angles)
to the direction of paper feeding.
dpi: dots per 25.4 mm (dots per inch)
TM-U210
The modes selectable by m are as follows:
“Vertical” is in the direction of paper feeding and “horizontal” is perpendicular (at right angles)
to the direction of paper feeding.
dpi: dots per 25.4 mm (dots per inch)
TM-U300A/B
The modes selectable by m are as follows:
“Vertical” is in the direction of paper feeding and “horizontal” is perpendicular (at right angles)
to the direction of paper feeding.
dpi: dots per 25.4 mm (dots per inch)
m Mode Vertical dot density
Horizontal
Dot density Set adjacent dots Maximum number of dots
0 8-dot single-density 72 dpi 80 dpi Permitted 200
1 8-dot double-density 72 dpi 160 dpi Prohibited 400
m Mode Vertical dot density
Horizontal
Dot density Set adjacent dots Maximum number of dots
0 8-dot single-density 72 dpi 80 dpi Permitted 200
1 8-dot double-density 72 dpi 160 dpi Prohibited 400
m Mode Vertical dot density
Horizontal
Dot density Set adjacent dots Maximum number of dots
0 8-dot single-density 72 dpi 80 dpi Permitted 200
1 8-dot double-density 72 dpi 160 dpi Prohibited 400