Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Status commands GS a
Ver. 10.01 p. 319
[Note] Only if ESC 4 is selected or paper stop printing sensor is not selected.
■ Basic ASB status is 4-byte configuration [first byte - fourth byte].
■ The status to be transmitted are as follows:
■ First byte (printer information)
■ Second byte (printer information)
Bit Binary Hex Decimal Status for ASB
0 0 00 0 Not used. Fixed to Off.
... how to use
this table
1 0 00 0 Not used. Fixed to Off.
2 0 00 0 Drawer kick-out connector pin 3 is LOW.
1 04 4 Drawer kick-out connector pin 3 is HIGH.
3 0 00 0 Online.
1 08 8 Offline.
4 1 10 16 Not used. Fixed to On.
5 0 00 0 Cover is closed.
1 20 32 Cover is open.
6 0 00 0 Paper is not being fed by the paper feed button.
1 40 64 Paper is being fed by the paper feed button.
7 0 00 0 Not used. Fixed to Off.
Bit Binary Hex Decimal Status for ASB
0 0 00 0 Not waiting for online recovery.
... how to use
this table
1 01 1 Waiting for online recovery.
1 0 00 0 Paper feed button is not pushed (off)
1 02 2 Paper feed button is pushed (on)

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English