Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Status commands GS a
Ver. 10.01 p. 320
• If recoverable error (bit 2) or autocutter error (bit 3) occurs due to paper jams or the like, it is possible
to recover by correcting the cause of the error and executing DLE ENQ.
• If an unrecoverable error (bit 5) occurs, turn off the power as soon as possible.
• The cause of the error can be checked by the offline response (when an offline cause is added). See
Function 49 of GS(H.
■ Third byte (paper sensor information)
2 0 00 0 No recoverable error (except for autocutter
error).
1 04 4 Recoverable error occurred (except for
autocutter error).
3 0 00 0 No autocutter error.
1 08 8 Autocutter error occurred.
4 0 00 0 Not used. Fixed to Off.
5 0 00 0 No unrecoverable error.
1 20 32 Unrecoverable error occurred.
6 0 00 0 No automatically recoverable error.
1 40 64 Automatically recoverable error occurred.
7 0 00 0 Not used. Fixed to Off.
Bit Binary Hex Decimal Status for ASB
0, 1 00 00 0 Roll paper near-end sensor: paper adequate.
... how to use
this table
11 03 3 Roll paper near-end sensor: paper near end.
2, 3 00 00 0 Roll paper end sensor: paper present.
11 0C 12 Roll paper end sensor: paper not present.
Bit Binary Hex Decimal Status for ASB

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English