Epson TM-T88III

CONFIDENTIAL
Paper roll Bar code commands GS k
Ver. 10.01 p. 352
■ Check digit (1 character) is calculated and added automatically.
■ Special character HRI is processed as follows:
• The printer does not print HRI characters that correspond to the shift character or code set selection
character (CODE A, CODE B, or CODE C).
• HRI characters of the function characters (FNC1, FNC2, FNC3, or FNC4) and control characters (00H to
1FH and 7FH) are printed as spaces.
[Model-dependent variations] TM-J2000/J2100,TM-T88III, TM-L60II, TM-P60, TM-T90, TM-L90
TM-J2000/J2100, TM-T88III, TM-L60II
Only capital letters (A ~ D) can be used for the start/stop character with CODABAR ( m = 6, 71).
TM-T90
Only capital letters (A ~ D) can be used for the start/stop character with CODABAR (m = 6, 71).
FNC3 {3 7B, 33 123, 51
FNC4 {4 7B, 34 123, 52
{ {{ 7B, 7B 123, 123
Program Example for all printers Print Sample
PRINT #1, CHR$(&H1D);"h";CHR$(80); ← Set height
PRINT #1, CHR$(&H1D);"k";CHR$(2); ← Print bar code
PRINT #1, "496595707379";CHR$(0);
PRINT #1, CHR$(&HA);
PRINT #1, CHR$(&H1D);"k";CHR$(67);CHR$(12);
PRINT #1, "496595707379"; ← Print bar code
Specific character
Transmit data
ASCII Hex Decimal