CONFIDENTIAL
Paper roll Miscellaneous commands DLE DC4 (fn = 2)
Ver. 10.01 p. 388
TM-L90
The BUSY condition is selected by memory switch 1-3.
While processing a set up of power-off, the POWER LED blinks fast and changes to slow blinking
after the printer transmits a power-off notice. Be sure that the POWER LED is blinking slowly; then
turn off the power switch.
When DIP switch [SW1-1] is ON, the power will not be turned off by this command. Be sure that
the power is turned off by an operator.
TM-P60
When memory switch [Msw8-1] is OFF, the power-off notice is not transmitted.
This command processes power-off disconnection.
To Next Page
Loading...
Need help?
General