Epson TM-T88III Programming Guide

CONFIDENTIAL
Paper roll Kanji commands FS 2
Ver. 10.01 p. 502
TM-L90
The user-defined characters can be defined for all the character codes in a range.
TM-U210
When the receive buffer capacity is set to 40 bytes (when DIP switch 1-2 is set to ON), a user-
defined character for one character can be defined.
If a user-defined character is already defined, defined character code can be redefined; however,
user-defined characters cannot be defined to new character codes. Horizontal adjacent dots
cannot be specified as print data.
TM-U230, TM-U300A/B
A user-defined character for one character can be defined.
If a user-defined character is already defined, defined character code can be redefined; however,
user-defined characters cannot be defined to new character codes. Horizontal adjacent dots
cannot be specified as print data.
TM-U220
Five user-defined characters characters can be defined.
If a user-defined character is already defined, the defined character code can be redefined;
however, user-defined characters cannot be defined to new character codes. Horizontal adjacent
dots cannot be specified as print data.

Epson TM-T88III Specifications

General

Brand	Epson
Model	TM-T88III
Category	Printer
Language	English