Epson TM-T88III

CONFIDENTIAL
Paper roll Kanji commands FS 2
Ver. 10.01 p. 501
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-U210, TM-U220, TM-U230,
TM-U300A/B
TM-J2000/J2100
It is possible to define 32 user-defined characters for each font. If 32 user-defined characters are
already defined, defined character code can be redefined; however, user-defined characters
cannot be defined to new character codes.
TM-T90
The user-defined characters can be defined for all the character codes in a range.
TM-T88III
The user-defined characters can be defined for all the character codes in a range.
Program Example
PRINT #1, CHR$(&H1C);”C”; CHR$(0): ←
Select JIS code system
PRINT #1, CHR$(&H1C);”2”;
PRINT #1, CHR$(&H77);CHR$(&H21);
FOR k = 1 To 32
READ d: PRINT #1, CHR$(d);
NEXT k
PRINT #1, CHR$(&H1C);”&”; ←
Specify Kanji mode
PRINT #1, CHR$(&H77);CHR$(&H21);
PRINT #1, CHR$(&H33);CHR$(&H30);
PRINT #1, CHR$(&H3B);CHR$(&H7A);CHR$(&HA);
PRINT #1, CHR$(&H3B);CHR$(&H7A);CHR$(&HA);
PRINT #1, CHR$(&H1C);”.”; ←
Cancel Kanji mode
DATA &H00, &H00, &H00, &H00, &H01, &HE0, &H07, &HF0
DATA &H0F, &HF0, &H1F, &HF2, &H3F, &HE2, &H7F, &HFE
DATA &H7F, &HFE, &H3F, &HE2, &H1F, &HF2, &H0F, &HF0
DATA &H07, &HF0, &H01, &HE0, &H00, &H00, &H00, &H00
Print Sample