Connecting to a Smart Device
Connecting to a smart device over a wireless router
You can use the printer from a smart device when you connect the printer to the same Wi-Fi network (SSID) as the
smart device. To use the printer from a smart device, set up from the following website. Access to the website from
the smart device that you want to connect to the printer.
http://epson.sn > Setup
Note:
If you want to connect a computer and a smart device to the printer at the same time, we recommend connecting the
computer rst.
Related Information
& “Printing from Smart Devices” on page 162
Connecting to an iPhone or iPad (iOS devices) using Wi-Fi Direct
is method allows you to connect the printer directly to an iPhone or iPad without a wireless router. e
following conditions are required to use this function. If your environment does not match these conditions, you
can connect by selecting Other OS Devices. See the related information link below for details on connecting.
❏ iOS 11 or later
❏ Using the standard camera application to scan the QR code
❏ Epson iPrint version 7.0 or later
Epson iPrint is used to print from a smart device. Install Epson iPrint on the smart device in advance.
Note:
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1. Tap on the home screen.
2. Tap Wi- Fi D ir e c t.
3. Tap Start Setup.
User's Guide
Network Settings
101
To Next Page
Loading...
Need help?
General
