❏ Center
Remove the shadows of the binding margin of the booklet.
Remove Punch Holes:
Remove the punch holes that appear in the scanned image. You can specify the area to erase the punch
holes by entering a value in the box on the right.
❏ Erasing Position
Select the position to remove the punch holes.
❏ Orientation (Original)
Select the orientation of the original.
Scanning Using WSD
Note:
❏ i s f e atu re i s on l y a v ai lab le for c o mpu te rs r unni ng Win do ws 10 /Wi nd ow s 8 .1 / Wind ow s 8 /Wi nd ows 7 /Wi nd o ws Vi st a .
❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature.
1. Place the originals.
Note:
If you want to scan multiple originals, place all of the originals on the ADF.
2. Select Scan on the home screen.
3.
Select WSD.
4. Select a computer.
5.
Tap
x
.
Setting Up a WSD Port
is section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e following is necessary to set up a WSD port.
❏
e
printer and the computer are connected to the network.
❏ e printer driver is installed on the computer.
1. Turn the printer on.
2. Click start, and then click Network on the computer.
3. Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
User's Guide
Scanning
184
To Next Page
Loading...
