Registering Your Favorite Settings as a Preset
You can register frequently used copy, fax, and scan settings as presets. You can register up to 50 entries. If you
cannot edit the presets, they may have been locked by the administrator. Contact your printer administrator for
assistance.
To register a preset, select Presets from the home screen, select Add New, and then select the feature for which you
want to register a preset. Make the necessary settings, select
, and then enter a name for the preset.
To load a registered preset, select the preset from the list.
You can also register the current address and settings to select
on the screen of each feature.
To change the registered settings, change the settings on the screen for each feature and select
. Select Save as
Preset, and then select the target that you want to overwrite.
Menu Options for Presets
Select on the registered preset to display the details of the registered settings. You can change the registered
name by selecting the name on the details screen.
:
Delete the registered preset.
Add /Remove:
Add or clear the registered preset to the home screen as a short-cut icon.
Use This Setting:
Load the registered preset.
Menu Options for Settings
Select Settings on the home screen of the printer to make various settings.
Menu Options for General Settings
Select the menus on the control panel as described below.
Settings > General Settings
Basic Settings
Select the menus on the control panel as described below.
Settings > General Settings > Basic Settings
You cannot change settings that have been locked by your administrator.
User's Guide
Preparing the Printer
55
To Next Page
Loading...
Need help?
General
