* You can store for one month at 40°C (104°F).
Environmental Specications for Ink Supply Units
Storage Temperature
-30 to 40 °C (-22 to 104 °F)
*
Freezing Temperature -13 °C (8.6 °F)
Ink thaws and is usable after approximately 5 hours at 25 °C (77 °F).
* You can store for one month at 40 °C (104 °F).
Installation Location and Space
To ensure safe use, place the printer in a location that meets the following conditions.
❏ A
at,
stable surface that can support the weight of the printer
❏ Well-ventilated location
❏ Locations that do not block or cover the vents and openings in the printer
❏ Locations where a dedicated electrical outlet can be secured
❏ Locations where you can load paper and remove paper easily
❏ Locations that meet the conditions in the "Environmental Specications" in this manual
c
Important:
Do not place the printer in the following locations; otherwise a malfunction may occur.
❏ Subject to direct sunlight
❏ Subject to rapid changes in temperature and humidity
❏ Subject to
re
❏ Subject to volatile substances
❏ Subject to shocks or vibrations
❏ Near a television or a radio
❏ Near excessive dirt or dust
❏ Near water
❏ Near air-conditioning or heating equipment
❏ Near a
humidier
Use a commercially available anti-static mat to prevent static generation in locations prone to generating static
electricity.
User's Guide
Appendix
302