Epson WF-C579R Series - Disabling Wi-Fi from the Control Panel; Disconnecting Wi-Fi Direct (Simple AP) Connection from the Control Panel

Note:
You can also set up from the Network tab > Wi -Fi D ire ct on Web Cong for the following settings.
❏ Enabling or disabling Wi-Fi Direct (simple AP)
❏ Changing network name (SSID)
❏ Changing password
❏ Restoring the Wi-Fi Direct (simple AP) settings
Disabling Wi-Fi from the Control Panel
When Wi-Fi is disabled, the Wi-Fi connection is disconnected.
1. Tap
on the home screen.
2. Select Router.
e
network status is displayed.
3. Tap Change Settings.
4. Select Others > Disable Wi-Fi.
5.
Check the message, and then start setup.
6. When a completion message is displayed, close the screen.
e screen automatically closes aer a specic length of time.
7. Close the Network Connection Settings screen.
8. Press the
button.
Disconnecting Wi-Fi Direct (Simple AP) Connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a
specic
device, disconnect from the device
instead of the printer.
1. Tap on the home screen.
2. Select Wi -F i D i re c t .
e
Wi-Fi Direct information is displayed.
3. Tap Start Setup.
4. Tap Change.
User's Guide
Network Settings
125