& “Basic Settings Menu” on page 94
Making Print Settings to Receive Faxes
Making Paper Source Settings to Receive Faxes (For Models with Two or More
Paper Sources)
You can set the paper sources used for printing received documents and fax reports. By default, all of the paper
sources are enabled for fax printing. Use this feature if you do not want to use paper in a specic paper source for
fax printing.
1. Select Settings on the home screen on the printer's control panel.
2. Select General Settings > Printer Settings > Paper Source Settings > Auto Select Settings > Fax.
3. Tap each box of the paper source not to use for printing faxes.
e paper source setting is changed to O and is disabled for printing faxes.
Related Information
& “Printer Settings” on page 57
Making Print Settings such as 2-Sided to Receive Faxes
You can set the printer to reduce paper by printing received faxes on both sides, or by printing them in reduced
size to
t
on paper. As an example, to set 2-Sided printing, follow the steps below.
1. Select Settings on the home screen on the printer's control panel.
2. Select General Settings > Fax Settings > Receive Settings.
3. Select Print Settings, and then select 2-Sided.
4. Tap the 2-Sided box to set this to On.
5. In Binding Margin, select Short Side or Long Side.
6. Select OK.
Related Information
&
“Print Settings Menu” on page 92
Making Settings to Save and Forward Received Faxes
e printer is set to print received faxes by default. Besides printing, you can set the printer to save and/or forward
received faxes. Note that the setting methods vary depending on whether the condition settings exist or not.
User's Guide
Fax Settings
79
To Next Page
Loading...
Need help?
General
