❏ Redirect HTTP to HTTPS
❏ Enable
Enables the redirect function for HTTP to HTTPS.
❏ Disable
Disables the redirect function for HTTP to HTTPS.
❏ Disable IPsec/IP Filtering
Disables the IPsec/IP ltering function if you cannot connect to the printer because of the security settings.
❏ Disable IEEE802.1X
Disables the IEEE802.1X function if you cannot connect to the printer because of the security settings.
❏ -iBeacon Transmission
❏ Enable
Enables the iBeacon transmission function.
❏ Disable
Disables the iBeacon transmission function.
Checking the Network Connection Status
You can check the network connection status in the following way.
Network Icon
You can check the network connection status and strength of the radio wave using the network icon on the
printer's home screen.
Related Information
&
“Icons displayed in the LCD Screen” on page 22
Checking Detailed Network Information from the Control Panel
When your printer is connected to the network, you can also view other network-related information by selecting
the network menus you want to check.
1. Select Settings on the home screen.
User's Guide
Network Settings
115