To check the status of the fax settings, you can print a Fax Settings List by selecting Fax > (More) > Fax Report
> Fax Settings List.
See "Related Information" below to make settings.
Related Information
& “Making Settings Individually for Printer's Fax Features” on page 76
Receiving Incoming Faxes
ere are two options in Receive Mode.
Related Information
& “Usage of Auto Mode” on page 201
& “Usage of Manual Mode” on page 201
Usage of Manual Mode
is mode is mainly for making phone calls, but is also for faxing.
Receiving Faxes
When the telephone rings, you can answer the ringing manually by picking up the handset.
❏ When you hear a fax signal (baud):
Select Fax on the printer's home screen, select Send/Receive > Receive, and then tap
x
. Next, hang up the
handset.
❏ If the ringing is for a voice call:
You can answer the phone as normal.
Receiving Faxes Using only the Connected Telephone
When Remote Receive is set, you can receive faxes by simply entering the Start Code.
When the telephone rings, pick up the handset. When you hear a fax tone (baud), dial the two digit Start Code,
and then hang up the handset. If your organization has a printer administrator and you do not know the start
code, contact the administrator.
Usage of Auto Mode
is
mode allows you to use the line for the following uses.
❏ Using the line for faxing only (external telephone is not necessary)
❏ Using the line for faxing mainly, and sometimes phoning
Receiving Faxes Without an External Phone Device
e
printer automatically switches to receive faxes when the number of rings you set in Rings to Answer is
complete.
User's Guide
Faxing
201
To Next Page
Loading...
