Epson WF-C579R Series - Power and Control Panel Problems; Power Does Not Turn on

❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
❏ Do not load originals above the line indicated by the triangle symbol on the ADF.
❏ Check that the ADF icon is on at the bottom of the screen. If it is o, place the originals again.
Related Information
& “Available Originals for the ADF” on page 39
&
“Placing Originals on the ADF” on page 39
&
“Cleaning the ADF” on page 233
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P button for a little longer.
User's Guide
Solving Problems
258