Note:
❏ If there are any errors reported, follow the instructions on the report to solve them.
❏ If the Select Line Type screen is displayed, select the line type.
- When you are connecting the printer to a PBX phone system or terminal adapter, select PBX.
- When you are connecting the printer to a standard phone line, select PSTN, and then select Do Not Detect on the
Conrmation screen displayed. However, setting this to Do Not Detect may cause the printer to skip the rst digit of
a fax number when dialing and send the fax to the wrong number.
Related Information
& “Connecting the Printer to a Phone Line” on page 71
& “Setting Receive Mode” on page 76
&
“Making Settings to Use an Answering Machine” on page 78
&
“Making Settings to Receive Faxes Operating Only a Connected Phone (Remote Receive)” on page 78
& “Basic Settings Menu” on page 94
Making Settings Individually for Printer's Fax Features
You can congure the printer's fax features individually using the printer's control panel. e settings made using
Fax Setting Wizard can also be changed. For more details, see the descriptions of the Fax Settings Menu.
Note:
❏ Using Web Cong, you can congure the printer's fax features.
❏ When you use Web
Cong
to display the Fax Settings menu, there may be slight
dierences
in the user interface and in
location compared to the printer's control panel.
Related Information
& “Menu Options for Fax Settings” on page 88
Setting Receive Mode
ere
are two options in Receive Mode for receiving incoming faxes. You can make settings in the menu below.
Settings > General Settings > Fax Settings > Basic Settings > Receive Mode
Receive Mode Use of Phone Line
Manual Mainly for phoning, but also for faxing
Auto Only for faxing (external phone device is not required)
Mainly for faxing, and sometimes phoning
Related Information
& “Usage of Auto Mode” on page 77
& “Usage of Manual Mode” on page 77
& “Basic Settings Menu” on page 94
User's Guide
Fax Settings
76
To Next Page
Loading...
Need help?
General
