Fax Settings
Before Using Fax Features
Set up the following to use the fax features.
❏ Connect the printer correctly with the phone line and, if necessary, with a phone
❏ Complete the Fax Setting Wizard, which is required to make basic settings.
Set the following as necessary.
❏ Output destinations and related settings, such as network settings and mail server settings
❏ Contacts registration
❏ User Settings that dene default values for Fax menu items
❏ Report Settings to print reports when faxes are sent, received, or forwarded
Related Information
& “Connecting to a Phone Line” on page 70
& “Making the Printer Ready to Send and Receive Faxes (Using Fax Setting Wizard)” on page 74
& “Making Settings Individually for Printer's Fax Features” on page 76
& “Menu Options for Fax Settings” on page 88
& “Network Settings” on page 98
& “Using an Email Server” on page 45
& “Managing Contacts” on page 49
& “Setting a Shared Folder” on page 52
& “Menu Options for User Settings” on page 68
& “Report Settings Menu” on page 94
Connecting to a Phone Line
Compatible Telephone Lines
You can use the printer over standard analogue telephone lines (PSTN = Public Switched Telephone Network) and
PBX (Private Branch Exchange) telephone systems.
You may not be able to use the printer with the following phone lines or systems.
❏ VoIP phone line such as DSL or ber-optic digital service
❏ Digital phone line (ISDN)
❏ Some PBX telephone systems
❏ When adapters such as terminal adapters, VoIP adapters, splitters, or DSL router are connected between the
telephone wall jack and the printer
User's Guide
Fax Settings
70
To Next Page
Loading...
Need help?
General
