Placing Originals
Place originals on the scanner glass or the ADF.
You can scan multiple originals and both sides of the originals at the same time with the ADF.
Available Originals for the ADF
Available Paper Sizes
A6, A5, Half Letter
*
, B5, Executive, 16K, A4, Letter, Legal, 8.5×13 in
*
Paper Type Plain paper, High-quality plain paper, Recycled paper
Paper Thickness (Weight of Paper) 64 to 95 g/m
Loading Capacity 50 sheets or 5.5 mm
* Only single-sided scanning is supported.
Even when the original meets the specications for media that can be placed in the ADF, it may not feed from the
ADF or the scan quality may decline depending on the paper properties or quality.
c
Important:
Do not feed photographs or valuable original artwork into the ADF. Misfeeding may wrinkle or damage the
original. Scan these documents on the scanner glass instead.
To prevent paper jams, avoid placing the following originals in the ADF. For these types, use the scanner glass.
❏ Originals that are torn, folded, wrinkled, deteriorated, or curled
❏ Originals with binder holes
❏ Originals held together with tape, staples, paper clips etc.
❏ Originals that have stickers or labels stuck to them
❏ Originals that are cut irregularly or not right angled
❏ Originals that are bound
❏ OHPs, thermal transfer paper, or carbon backs
Placing Originals on the ADF
1. Align the edges of the originals.
User's Guide
Preparing the Printer
39
To Next Page
Loading...
Need help?
General
