A
Turns the printer on or o.
Unplug the power cord after checking that the power light is o.
B
Displays the home screen.
C
Displays the Help screen.
You can check solutions to problems from here.
D
Logs o from the printer when Access Control is enabled.
When Access Control is disabled, this is also disabled.
E
Pauses the current printing job and allows you to interrupt another job. However, you cannot interrupt a new job
from the computer.
Press this button again to restart a paused job.
F
Resets the current settings to user default settings. If user default settings have not been made, resets to the
factory default.
G
Displays the Contacts list. You can register, edit or delete the contacts.
H
Turns on when received documents that have not yet been read, printed, or saved, are stored in the printer's
memory.
I
Displays menus and messages.
J
Stops the current operation.
K
Displays the Paper Setting screen. You can select the paper size and paper type settings for each paper source.
L
Displays the Job/Status menu. You can check the printer's status and job history.
The error light on the left ashes or turns on when an error occurs.
The data light on the right ashes when the printer is processing data. It turns on when there are queued jobs.
M
Enters numbers, characters, and symbols.
N
Clears number settings such as the number of copies.
Basic Screen Conguration
User's Guide
Printer Basics
21
To Next Page
Loading...
Need help?
General
