Epson WF-C579R Series - Moiré (Cross-Hatch) Patterns Appear in the Copied Image; An Image of the Reverse Side of the Original Appears in the Copied Image; The Printout Problem Could Not be Cleared; Other Printing Problems

& “Basic Menu Options for Copying” on page 167
Moiré (Cross-Hatch) Patterns Appear in the Copied Image
Change the reduce and enlarge setting or place the original at a slightly dierent angle.
Related Information
& “Basic Menu Options for Copying” on page 167
An Image of the Reverse Side of the Original Appears in the Copied
Image
❏ For a thin original, place the original on the scanner glass and then place a piece of black paper over it.
❏ Lower the copy density setting on the control panel.
Related Information
& “Basic Menu Options for Copying” on page 167
The Printout Problem Could Not be Cleared
If you have tried all of the solutions and have not solved the problem, try uninstalling and then reinstalling the
printer driver.
Related Information
& “Uninstalling Applications” on page 245
& “Installing the Latest Applications” on page 243
Other Printing Problems
Printing Is Too Slow
❏ Close any unnecessary applications.
❏ Lower the quality setting. High quality printing slows down the printing speed.
User's Guide
Solving Problems
276