Sharpness Enhances or defocuses the outline of the image. + enhances the sharpness, and - defocuses the
sharpness.
ADF 2-Sided Scans both sides of originals placed in the ADF and sends a monochrome fax.
Continuous Scan(ADF) Sending faxes by placing originals one by one, or by placing originals by size, you can send
them as one document at their original sizes. See the related information below on this topic.
Fax Send Settings
Direct Send Sends a monochrome fax while scanning the originals. Since scanned originals are not stored
temporarily in the printer's memory even when sending a large volume of pages, you can avoid
printer errors due to a lack of memory. Note that sending using this feature takes longer than
not using this feature. See the related information below on this topic.
You cannot use this feature when:
❏ Sending a fax using the ADF 2-Sided option
❏ Sending a fax to multiple recipients
Priority Send Sends the current fax before other faxes waiting to be sent. See the related information below
on this topic.
Send Fax Later Sends a fax at a time you specied. Only a monochrome fax is available when using this option.
See the related information below on this topic.
Add Sender Information ❏ Add Sender Information
Select the position where you want to include the header information (sender name and fax
number) in the outgoing fax, or not to include the information.
- O: Sends a fax with no header information.
- Outside of Image: Sends a fax with header information in the top white margin of the fax.
This keeps the header from overlapping with the scanned image, however, the fax received
by the recipient may be printed across two sheets depending on the size of the originals.
- Inside of Image: Sends a fax with header information approximately 7 mm lower than the
top of the scanned image. The header may overlap with the image, however, the fax
received by the recipient will not be split into two documents.
❏ Fax Header
Select the header for the recipient. To use this feature, you should register multiple headers
in advance.
❏ Additional Information
Select the information you want to add. You can select one from Yo ur Phone Num b e r and
Destination List.
Notify Send Result Sends a notication after you send a fax.
Transmission Report Prints a transmission report after you send the fax.
Print on Error prints a report only when an error occurs.
Backup Saves a backup of the sent fax that is scanned and saved to the printer's memory automatically.
The backup feature is available when:
❏ Sending a fax in monochrome
❏ Sending a fax using the Send Fax Later feature
❏ Sending a fax using the Batch Send feature
❏ Sending a fax using the Store Fax Data feature
User's Guide
Faxing
207
To Next Page
Loading...
Need help?
General
