❏ Ink Save Mode
Select On to save ink by reducing the print density.
❏ Print Order
Last Page on Top
Starts printing from the rst page of a le.
First Page on Top
Starts printing from the last page of a
le.
❏ Number of Copies
Set the number of copies to print.
❏ Binding Margin
Select the binding position.
❏ Auto Paper Ejection
Select On to eject paper automatically when printing is stopped during a print job.
❏ 2-Sided Printing
Select On to perform 2-sided printing.
PCL Menu:
❏ Font Source
Resident
Select to use a font preinstalled on the printer.
Download
Select to use a font you have downloaded.
❏ Font Number
Select the default font number for the default font source. e available number varies
depending on the settings you made.
❏ Pitch
Set the default font pitch if the font is scalable and of xed-pitch. You can select from 0.44 to
99.99 cpi (characters per inch), in 0.01 increments.
is
item may not appear depending on the font source or font number settings.
❏ Height
Set the default font height if the font is scalable and proportional. You can select from 4.00
to 999.75 points, in 0.25 increments.
is item may not appear depending on the font source or font number settings.
❏ Symbol Set
Select the default symbol set. If the font that you selected in the font source and the font
number setting is not available in the new symbol set setting, the font source and the font
number settings are automatically replaced with the default value, IBM-US.
❏ Form
Set the number of lines for the selected paper size and orientation.
is
also causes a line
spacing (VMI) change, and the new VMI value is stored in the printer.
is
means that later
changes in the page size or orientation settings cause changes in the Form value based on
the stored VMI.
User's Guide
Preparing the Printer
59
To Next Page
Loading...
Need help?
General
