075-921 Printer
Insert Output to Tray
Press [OK] Button to
Continue Printing
2. After the even pages are printed, pull out the paper tray and remove the paper tray cover.
See Also:
“Loading Print Media in the Paper Tray” on page 123
3. Remove the paper stack from the center output tray and load it into the paper tray with the blank
surface facing up.
Note:
Warped or curled prints can cause paper jams. Straighten them before setting them.
4. Replace the paper tray cover, insert the paper tray into the printer, and then press the
button.
AL-MX200 Series User’s Guide
Printing Basics 144
To Next Page
Loading...
