Epson WorkForce AL-MX200DNF

Lighten2
Makes the copy lighter than the source document. Works well with dark print.
Lighten1
Normal
*
Works well with standard type or printed documents.
Darken1
Makes the copy darker than the source document. Works well with light print
or faint pencil markings.
Darken2
*
Factory default menu setting
5. If necessary, customize other copy options including the number of copies, copy size, and image
quality.
See Also:
“Customizing Copy Options” on page 166
6. Press the
(Start) button to begin copying.
Sharpness
You can adjust the sharpness to make the copy sharper or softer than the source document.
1. Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going in
first; or place a single document face down on the document glass and close the document cover.
See Also:
❏ “Making Copies From the Automatic Document Feeder (ADF)” on page 165
❏ “Making Copies From the Document Glass” on page 163
2. Press the
(Copy) button.
3. Select Sharpness, and then press the
button.
4. Select the desired setting, and then press the
button.
Sharpest
Makes the copy sharper than the source document.
Sharper
Normal
*
Keeps the sharpness of the source document as it is.
AL-MX200 Series User’s Guide
Copying 174