Epson WorkForce AL-MX200DNF

❏ “Making Copies From the Document Glass” on page 163
2. Press the
(Copy) button.
3. Select Document Type, and then press the
button.
4. Select the desired setting, and then press the
button.
Text
Suitable for documents with text.
Mixed
*
Suitable for documents with both text and photos/gray tones.
Photo
Suitable for documents with photos.
*
Factory default menu setting
5. If necessary, customize other copy options including the number of copies, and copy size.
See Also:
“Customizing Copy Options” on page 166
6. Press the
(Start) button to begin copying.
Lighten/Darken
You can adjust the copy density level to make the copy lighter or darker than the source document.
1. Load a document(s) face up on the Automatic Document Feeder (ADF) with the top edge going in
first; or place a single document face down on the document glass and close the document cover.
See Also:
❏ “Making Copies From the Automatic Document Feeder (ADF)” on page 165
❏ “Making Copies From the Document Glass” on page 163
2. Press the
(Copy) button.
3. Select Lighten/Darken, and then press the
button.
4. Select the desired setting, and then press the
button.
AL-MX200 Series User’s Guide
Copying 173