Connection Type Available Features
USB When connected via USB connection you can:
❏ Instruct print jobs from a computer.
❏ Scan and print an image into an application.
❏ Scan and print an image to a folder on the computer.
❏ Use the Address Book Editor to manage Address Book entries.
Ethernet When connected via Ethernet connection you can:
❏ Instruct print jobs from a computer on the network.
❏ Scan and print an image to a computer on the network.
❏ Scan and print an image to an FTP server.
❏ Scan to e-mail.
❏ Use EpsonNet Config to manage Address Book entries.
Wireless (AL-MX200DWF only) When connected via wireless connection you can:
❏ Instruct print jobs from a computer on the network.
❏ Scan and print an image to a computer on the network.
❏ Scan and print an image to an FTP server.
❏ Scan to e-mail.
❏ Use EpsonNet Config to manage Address Book entries.
USB Connection
If your printer is connected to a network instead of your computer, skip this section and go to
“Network Connection” on page 42.
To connect the printer to a computer:
1. Connect the smaller end of the supplied USB cable to the USB port on the rear of the printer, and
the other end to a USB port on the computer.
AL-MX200 Series User’s Guide
Printer Connection and Software Installation 41
To Next Page
Loading...
