!
Caution:
Do not apply excessive force to hold a thick document on the document glass. It may break the
glass and cause injuries.
3. Adjust the document resolution, referring to “Resolution” on page 227.
4. Close the document cover.
Note:
❏ Ensure that no document is on the Automatic Document Feeder (ADF). If any document is detected
on the ADF, it will take priority over the document on the document glass.
❏ If you are faxing a page from a book or magazine, lift the document cover until its hinges are caught
by the stopper and then close the document cover. In case the book or magazine is thicker than 20
mm, start faxing with the document cover open.
Resolution
You can specify the resolution level to be used for fax transmission.
1. Press the
(Fax) button.
2. Select Resolution, and then press the
button.
3. Select the desired menu item, and then press the
button.
Standard
*
Suitable for documents with normal sized characters.
Fine
Suitable for documents containing small characters or thin lines or
documents printed with a dot-matrix printer.
AL-MX200 Series User’s Guide
Faxing 227
To Next Page
Loading...
