Epson WorkForce AL-MX200DNF

Overview
The Scan to Server/Scan to Computer feature allows you to scan documents on the printer and send
the scanned documents to a network computer using the FTP or SMB protocol.
When using the FTP protocol, you need to select a server and specify a destination to store scanned
document using EpsonNet Config or Address Book Editor.
The following is required to use the Scan to Server/Computer feature.
❏ Using the SMB
Your computer must run on one of the following operating systems and have the folder sharing
enabled.
For Mac OS X, a shared user account is required on the Mac OS X.
❏ Windows Server 2003
❏ Windows Server 2008
❏ Windows Server 2008 R2
❏ Windows XP
❏ Windows Vista
❏ Windows 7
❏ Mac OS X 10.5/10.6/10.7
AL-MX200 Series User’s Guide
Scanning 188